Free browser calculator. JavaScript is needed for live results. No account is required.
Calculator
Reef Return Pump Calculator
The box flow rating describes zero head. Enter your setup to see estimated delivered flow at the operating point modeled from your plumbing and each recorded pump curve. This is not a measurement of installed flow.
Paid links: if you buy through links on this page we may earn a commission, at no extra cost to you — it never affects our ratings. How we make money.
Why zero-head GPH is only a starting point
Every return pump is rated at its maximum flow with zero head — pump sitting next to a bucket, no plumbing. The moment you lift water up to your display and push it through pipe, elbows, and a return nozzle, flow drops fast. The amount of loss depends on the pump curve and plumbing. Use the entered setup below the maximum-flow rating rather than assuming the box number reaches the display.
The three numbers that actually size a pump
1. Target flow (turnover). Most reef tanks run their return at 5–10× the display volume per hour. Mixed reefs are happy around 7×; SPS-heavy tanks push higher; fish-only can go lower. This is flow at the tank, after losses.
2. Static head. The vertical distance from your sump's water surface up to the return outlet. Every foot of rise costs flow.
3. Friction (dynamic) head. Losses from pushing water through pipe and fittings. Narrower pipe and more elbows = dramatically more loss. We compute this with the Hazen-Williams equation (C=150 for PVC) plus an equivalent-length allowance for each 90° elbow.
Total dynamic head, explained
Add static head + friction head and you get total dynamic head (TDH) — the real resistance your pump fights. We find each pump's operating point (where its flow-vs-head curve crosses your system's curve) and report the flow it truly delivers there. A pump "makes your target" only if that delivered flow meets your turnover goal.
Should you oversize?
Compare the best return pumps by tank size for our reference setups, then use your own plumbing above to check the shortlist. The DC vs AC return pump guide explains the control and cost trade-offs before you buy.
A little, yes — pick the smallest pump that clears your target, then confirm it has a bit of headroom (and a gate valve to dial it back). Massively oversizing wastes energy, adds heat and noise, and often gets throttled down anyway. DC pumps make this easy: they're adjustable and quieter, usually worth the premium over AC for a return.
Free — one email
The Reef Gear Cheat Sheet.
The exact skimmer / pump / light picks by tank size, plus our full build-cost worksheet — as one email, no spam.
Prefer the browser? Read the cheat sheet now.
One email with the sheet. If we ever start a newsletter, you can opt out first. Privacy