Free browser calculator. JavaScript is needed for live results. No account is required.
Calculator
Reef Salt Mixing Calculator
How much dry salt goes in your mixing container? Enter the water amount and your salt maker's rate for your chosen salinity. Get grams and kilograms for a batch, an initial fill, or a planned water change. This tool works with any brand whose instructions give a weight per litre or US gallon.
Use the rate printed for the salinity you want. If your label says 750 g per 5 US gallons, enter 150 and choose grams per US gallon. That is an arithmetic example, not a brand recipe. Cups and dry millilitres are not grams.
Mix outside the tank. Add dry salt to water in a separate clean container, following your maker's order, temperature and mixing time. Check the finished salinity with a calibrated instrument before use. This is a starting weight, not a measured salinity or a livestock correction plan.
Paid links: if you buy through links on this page we may earn a commission, at no extra cost to you — it never affects our ratings. How we make money.
Choosing a mix? Compare cost per mixed gallon or read the reef salt comparison. Product links on those pages may earn a commission.
The math: salt weight from your label
dry salt grams = water amount × label grams per water unit. For a percent water change, batch water = system water × change percent ÷ 100. The calculator converts units first: one US gallon is 3.785411784 litres. It does not use Imperial gallons.
For a water change, enter the actual system water volume, not just the tank name. The tank volume calculator helps estimate water after rock, sand and sump. Check the prepared replacement amount before draining your tank; dissolved salt can change the final batch volume.
Worked examples
These sample rates show the arithmetic. They are not product instructions; replace them with your own label rate.
Small batch
Metric batch
20% of a 75 US gal system
Why there is no universal salt preset
Dry salt mixes differ. A bucket's advertised gallon yield is not enough to infer a weight for your chosen salinity. If your Instant Ocean or other label gives only cups, use its directions or ask the maker for a weight; this tool does not turn cups into grams using a guessed density.
Read whether the rate is per litre of starting water or per litre of finished saltwater, and use the same basis here. No salinity scaling is applied. The grams are for the salinity attached to your entered label rate, not a promise that any batch will reach it exactly.
Mix, test, then use
- Read the current package directions and choose the rate for your target salinity.
- Measure the water on the basis those directions use. For an initial fill, account for rock and sand rather than using the tank's nominal capacity.
- Weigh the salt and mix in a separate container as directed. Do not add dry salt to an aquarium holding animals.
- Let the salt dissolve as the maker directs, then measure salinity and temperature. Adjust the separate batch, mix again, and recheck before use.
Evaporation leaves salt behind. Routine freshwater top-off is a different job from replacing removed saltwater. See the salinity converter if your instrument uses a different reading unit, and the water change calculator for nutrient dilution.
Sources and limits
Checked October 25, 2026: Tropic Marin Pro-Reef application instructions describe mixing salt into water in a container and give a weight range rather than one exact weight. Those directions support the mixing method here; their range is not a preset for any brand. NIST's unit conversion table supplies the US-gallon conversion. Follow your own product's current directions for mixing time and temperature; this page does not set a universal waiting period.
All inputs reset on reload. No account, saved tank profile or product price is needed.
Free — one email
The Reef Gear Cheat Sheet.
The exact skimmer / pump / light picks by tank size, plus our full build-cost worksheet — as one email, no spam.
Prefer the browser? Read the cheat sheet now.
One email with the sheet. If we ever start a newsletter, you can opt out first. Privacy