Some links are paid links — if you buy through them we may earn a commission, at no extra cost to you. How this works.

By ReefMetric. Page updated: . Equipment data keeps the source dates shown below.

Reviews · LED Lighting

Best reef tank LED lighting: compare the data and its limits

Start with your tank footprint, coral placement, and a light's test conditions. A PAR reading from an air test cannot stand in for a reading under water. These four fixtures have numerical readings in our records; they were not tested side by side.

Use the reef PAR calculator to explore one recorded curve at a time. Use the build cost calculator to budget for the fixture count and mounting hardware your tank needs.

Paid links: if you buy through links on this page we may earn a commission, at no extra cost to you — it never affects our ratings. How we make money.

Equipment prices below are recorded from 2026-07-01, not current quotes. Source and measurement corrections were checked on 2026-10-25. A change to this page does not refresh every product price. Follow the source and retailer links before ordering.

Four fixtures, with the conditions shown

Aqua Illumination Prime 16HD

Manufacturer peak reading at 24 inches water depth. Mounting height and spectrum are not specified with this point; it is not 24 inches above water.

Recorded points: 100 PAR at 24 inches. Read the measurement source.

24 x 24 inches recorded coverage. Coverage is a maker description; it does not prove even PAR across that area.

Maker technical specifications list 59W; the same page power-output text says 55W. Use measured draw for electricity costs.

$264.99 recorded

Aqua Illumination Hydra 32 HD

Recorded DaniReef lab sensor-to-fixture distances; this is not a coral-depth curve. Source could not be re-read during the October 25 check.

Recorded points: 1908 PAR at 12 inches · 462 PAR at 18 inches · 197 PAR at 24 inches. Read the measurement source.

24 x 24 inches recorded coverage. Coverage is a maker description; it does not prove even PAR across that area.

$413.99 recorded

Orphek Atlantik iCon

Bottom-center sensor in a 48 × 24 × 24-inch tank with 21.65-inch water depth; distance is fixture to tank bottom, all channels at 100%. Only these two source-confirmed center points are used.

Recorded points: 401 PAR at 23.62 inches · 248 PAR at 35.43 inches. Read the measurement source.

43 x 25 inches recorded coverage. Coverage is a maker description; it does not prove even PAR across that area.

$794.75 recorded

Fluval Sea Marine 3.0 (46W)

Recorded water-depth readings from the July dataset. The old retailer source returned 404; the current maker page blocks automated rechecks. Mount and spectrum conditions are unconfirmed.

Recorded points: 381 PAR at 3 inches · 94 PAR at 12 inches. Read the measurement source.

36-48 (rim-mount strip, expandable legs) inches recorded coverage. Coverage is a maker description; it does not prove even PAR across that area.

Check current price

The Orphek explorer uses only the two bottom-center readings confirmed in its linked tank test. Earlier unconfirmed points remain in the data record for audit history and are excluded from calculations. The Hydra and Fluval readings remain dated records; their sources could not be fully re-read during this check.

Which light suits your tank?

A small reef: the Prime has a single manufacturer point, useful as a reference for its test depth. That one point cannot predict every mounting height. Check your tank's length and width, then leave room in the budget for a mount and a way to measure light at the corals.

A deeper or wider display: read the full coverage map rather than comparing its highest center number with another light. The Orphek source places its sensor on the tank bottom and changes the fixture height. A bright center does not tell you what reaches the corners.

A strip light: confirm the exact fixture length and output version. The Fluval record is the 46W Marine 3.0, not another size in the range. Its old retailer URL stopped working; the linked maker page identifies the model. We do not substitute another model's PAR chart or price.

Records without a comparable curve

The list below records a gap in our dataset. It does not mean a manufacturer or reviewer has never published measurements. Charts in images or videos can be useful evidence, too. Check the exact generation, spectrum, lens, intensity, sensor location, and water depth before comparing readings.

Buying Kessil for a reef? Its own guide identifies Tuna Blue for saltwater and Tuna Sun for freshwater. The two Tuna Sun entries above are excluded from reef buying links. Check the full variant name on the retailer page.

How to use PAR without guessing

PAR describes the light available for photosynthesis; aquarium meters commonly report photon flux density in μmol/m²/s. A useful measurement includes the fixture settings and sensor position. Moving a lamp, changing a lens, changing the water, or adding shading can change the result.

The calculator interpolates only between stored points for a single fixture and reports unknown outside them. Interpolation is a straight-line estimate inside that source's setup. It does not model water absorption, lens changes, rock shadows, or a different spectrum. A single-point light gives a value only at that recorded coordinate.

For your own reef, measure at the intended coral positions and change intensity gradually while watching the animals. Published tests help you choose what to investigate; they do not prove your coral receives the same light. Read our methods, then plan water movement with the flow calculator.

Free — one email

The Reef Gear Cheat Sheet.

The exact skimmer / pump / light picks by tank size, plus our full build-cost worksheet — as one email, no spam.

Prefer the browser? Read the cheat sheet now.

One email with the sheet. If we ever start a newsletter, you can opt out first. Privacy

Sent

Check your inbox.

The cheat sheet is on its way from ReefMetric. Can't wait — or it hasn't landed in a few minutes? Read it right now →